VanDOOR

INGENIEROS, NO BOTS

Hableconingenieros,noconchatbots.

Tanto si integra puertas en un nuevo programa de carrocería, busca repuestos para el taller o planifica la próxima renovación de su flota — nuestro equipo francés está a un mensaje de distancia.

Tiempo de respuesta

Menos de 24h

Línea directa

Ingenieros comerciales

Nos vemos en

IAA Hannover, sept. 2026

ENVIAR MENSAJE

Cuéntenos sobre su proyecto.

Unos pocos datos son suficientes — enrutamos su mensaje al ingeniero adecuado. Los campos obligatorios están marcados.

+34 91 123 45 67

Especificaciones, plazos, tipos de vehículo — cuanto más contexto, más rápido podemos ayudar.

FAQ rápida

Antes de escribirnos — quizás ya respondida

¿Pregunta no listada? Contacte con nuestros ingenieros.

  • External release procedure: (1) insert the DoorLIFT key into the lock cylinder at the centre of the intermediate or top panel, outside face; (2) turn the key 90° clockwise and firmly pull the lock and cable out of the cylinder — the system disengages; (3) reinsert the cable and cylinder into the door lock housing, then operate the door by hand. On the AluLIFT, an internal release is available: pull the red sleeve marked 'EMERGENCY DOOR RELEASE' to disengage the motor lever from inside the box.

    SRCFR---Manuel-utilisateur-DL-6.mdl.617-632 + utilisation l.420-449

  • The DL-6 is a retrofit motorisation kit for any existing roller door — installable by a qualified bodybuilder. The AluLIFT is a full door system: modular aluminium panels, vertical and horizontal rails, centred balancer, integrated drive. The AluLIFT falls under Machinery Directive 2006/42/EC and must be integrated by a trained, qualified bodybuilder, with a CE Declaration of Conformity for the final assembly. Motor, sensors and control box parts are common to both ranges.

    SRCFR---Brochure-Doorlift-6.mdl.43-44 + Manuel-instruction-installation l.45-53

  • The DL-6 brochure explicitly states 'silent operation (PIEK 60 dB(A) compliant)'. This unlocks usage in urban zones with night-time restrictions (typically 10 pm to 7 am). Note: perceived noise also depends on door condition itself (axle lubrication, roller state).

    SRCFR - Brochure Doorlift 6.pdfl.section Caractéristiques

  • VanDOOR does not perform installation itself. AluLIFT integration must be carried out exclusively by qualified, trained bodybuilders or integrators, in accordance with Machinery Directive 2006/42/EC and best practice. The integrator guarantees regulatory compliance of the final assembly, verifies correct operation, commissions the system, and supplies the end user with the manual and CE Declaration of Conformity for the integrated equipment.

    SRCManuel-instruction-installation.mdl.45-72

  • The technical documentation provided does not specify the commercial warranty duration (DL-6 nor AluLIFT). For the AluLIFT, VanDOOR supplies a CE Declaration of Conformity covering the door as delivered — not the warranty. Please confirm directly with your VanDOOR commercial contact or via info@vandoor.fr for exact terms (duration, parts/labour scope, exclusions).

¿Listo para equipar su flota?

Diseño, fabricación y servicio posventa de puertas enrollables industriales — para carroceros, técnicos de mantenimiento y gestores de flotas.

Reflejos de campo

Dos puntos clave antes que cualquier otra cosa

Procedimientos críticos para mantenerse operativo — desbloqueo de emergencia y cualificación del instalador.

  • External release procedure: (1) insert the DoorLIFT key into the lock cylinder at the centre of the intermediate or top panel, outside face; (2) turn the key 90° clockwise and firmly pull the lock and cable out of the cylinder — the system disengages; (3) reinsert the cable and cylinder into the door lock housing, then operate the door by hand. On the AluLIFT, an internal release is available: pull the red sleeve marked 'EMERGENCY DOOR RELEASE' to disengage the motor lever from inside the box.

    SRCFR---Manuel-utilisateur-DL-6.mdl.617-632 + utilisation l.420-449

  • VanDOOR does not perform installation itself. AluLIFT integration must be carried out exclusively by qualified, trained bodybuilders or integrators, in accordance with Machinery Directive 2006/42/EC and best practice. The integrator guarantees regulatory compliance of the final assembly, verifies correct operation, commissions the system, and supplies the end user with the manual and CE Declaration of Conformity for the integrated equipment.

    SRCManuel-instruction-installation.mdl.45-72